Tổng quan


FEA for Construction
BIM fully compliant with Revit
Concrete - Steel - Timber

Advance Design phần mềm mô hình, phân tích thiết kế kết cấu của hãng Graitec Pháp. Ứng dụng trong các dạng công trình bê tông, kết cấu thép và gỗ. 

Hỗ trợ các tiêu chuẩn thiết kế Eurocodes ( EC0, EC1, EC2, EC3, EC5 và EC8), Mỹ (ACI / AISC) và Canada (A23.3 / S16).

Phân tích kết cấu dành cho những nhà xây dựng chuyên nghiệp 

Advance Design là giải pháp phần mềm phần tử hữu hạn trong mô hình phân tích và liên kết giữ liệu giúp các kỹ sư dễ dàng triển khai BIM trong thiết kế kết cấu công trình. 

Nó hỗ trợ đầy đủ mọi loại kết cấu, các dạng tải trọng, các dạng vật liệu bê tông, thép và gỗ. Hỗ trợ các tiêu chuẩn thiết kế châu Âu và bắc Mỹ.

  • >Mạnh mẽ, dễ sử dụng và hiệu nang cao
  • >BIM: Tương thích hoàn toàn với REVIT
  • >Đội ngũ hỗ trợ kỹ thuật chuyên nghiệp
  • >Mô hình license linh hoạt
  • >Hàng nghìn khách hàng đang sử dụng trên toàn cầu.
Link download bản dùng thử Graitec:


 
 
https://www.graitec.info/Advance2020/Install2020/PPAS/PowerPack.msi https://www.graitec.info/Advance2020/Install2020/BIM/BIMConnectSetup.msi
https://www.graitec.info/Advance2020/Install2020/BD/AdvanceBIMDesignersStairsRailings.msi https://www.graitec.info/Advance2020/Install2020/BD/AdvanceBIMDesigners.msi https://www.graitec.info/Advance2020/Install2020/BD/AdvanceBIMDesigners.msi
https://www.graitec.info/Advance2020/Install2020/AD/AdvanceDesign.msi https://www.graitec.info/Advance2020/SetupAdvanceCAD2020.exe https://www.graitec.info/OMD2020/SetupOMD.exe
https://www.graitec.info/OMD2029/SetupOMD.exe https://www.graitec.info/Advance2020/SetupAdvanceDSTV2020.exe https://www.graitec.info/Common/Downloads/AW/ArchiWIZARD-2019-x64(7.0.0).msi
https://www.graitec.info/Common/Downloads/AW/ArchiWIZARD-2019(7.0.0).dmg    


Tư vấn phần mềm Graitec liên hệ: 0859999698 hoạc tuandinh@cic.com.vn



 

BIM

Advance Design provides an outstanding BIM experience and enables intelligent workflows for Architects,
Engineers and Construction professionals. It supports model import-export- synchronisation mechanisms
using main industry standards (IFC, CIS/2, SDNF, STP…) and through an API with Autodesk Products:
Autodesk Revit® and Autodesk Advance Steel®.

Connected Structural Workflow

Connected structural workflows are no longer science fiction but a stark reality that is delivering newfound accuracy and performance. Discover how!

Learn more

Autodesk Revit® Integration

Advance Design connects to Revit® through an API and streamlines BIM workflows. Import, export, synchronisation of models and results package storage are available.

IFC Compliancy

Advance Design interoperates with 3rd party BIM platforms using IFC.

Autodesk Advance Steel® Connectivity

Autodesk Advance Steel® Connectivity

The strong link with Advance Steel® speeds up modelling and detailing of steel structures.

BIM Designers Integration

BIM Designers Integration

Empower Advance Design with steel and concrete design modules and get automatically detailed design reports, design intent and drawings.

Analytical Model

Analytical Model

Advance Design comes with effective tools to solve geometrical issues such as merging nodes, extending linear elements, checking vertical alignment, etc.

Mô hình & Tải trọng

Advance Design is probably one of the easiest to learn and use structural package. Modelling is intuitive thanks to a complete library of structural elements, advanced wizards and automatic loads generators (climatic loads, seismic loads, traffic loads…). These easily customisable elements and wizards adapt to any situation: numerical eccentricities, braces, ties with initial pre-stressing, complex loading systems…

 

Modelling

dynamic views

Dynamic Views

Views can be saved dynamically during the modelling phase. This allows you to come back at any time on any stage of your design, showing the saved filtered elements, colours, zoom level, displayed tags, etc.

Levels Management

Levels Management

Advance Design helps to easily manage multi-storey buildings. Structural members are created in the right floor in a few clicks, floor height is changed easily, storeys are duplicated or moved in a few clicks, etc.

Property Templates

Property Templates

Save and load property templates of Advance Design objects to speed up your structural FEM modelling and customize the software.

Loading

Climatic Loads

Climatic Loads

Advance Design embeds a strong 3D climatic load generator allowing users to quickly create wind and snow loads according to Eurocodes, Canadian and American codes.

Learn more

Seismic Loads

Seismic Loads

Generate the seismic spectrum and loads according to local standards (Several seismic codes implemented).

Traffic Loads

Traffic Loads

The moving loads generator allows users to rapidly create traffic loads on bridges and buildings in order to simulate traffic movement effects.

FEA

Advance Design features a powerful mesh and multicore FEM analysis engine, automated post-processing tools and detailed smart reports, automatically updated after every iteration. Achieve a new level of computer aided engineering with Advance Design!

Mesh Capabilities

Mesh Capabilities

Meshing is an essential step for a FEA. Advance Design embeds a Delaunay mesh engine able to mesh huge 3D models within a few seconds.

Learn more

FEM Analysis

FEM Analysis

Handle all your FEM analysis with Advance Design: static, dynamic, non-linear analyses, large displacements, generalised buckling, step calculation, etc.

Capacity Design

Capacity Design

The capacity design method is critical when designing concrete frames in a seismic area. Handle this advanced calculation within a few clicks in Advance Design.

Graphical Postprocessing

Graphical Postprocessing

Several graphical post-processing methods are available: directly on the model; along a cut placed anywhere in the model; stresses diagrams. Post-processing on planar elements is made easy as it can be done on a grid independent from the mesh size.

Detailed Reports

Fully customisable design reports: styles, tables and graphical images, cover sheet, user input text, linked documents, etc...

Storey Drifts Checks

Storey Drifts Checks

Handle all your FEM analysis with Advance Design: static, dynamic, non-linear analyses, large displacements, generalised buckling, step calculation, etc.

Postprocessing Scenario

You can define postprocessing templates allowing users to automate the creation of reports containing right away predefined tables and real-time graphical views with results.

3D Animation

Several graphical post-processing methods are available: directly on the model; along a cut placed anywhere in the model; stresses diagrams. Post-processing on planar elements is made easy as it can be done on a grid independent from the mesh size.

Non linear Analysis

Non linear Analysis

Model the realistic behaviour interaction between components and obtain solutions to your geometric nonlinear problems.

Step Calculation

Step Calculation

Handle all your FEM analysis with Advance Design: static, dynamic, non-linear analyses, large displacements, generalised buckling, step calculation, etc.

Time History Analysis

Time History Analysis

Study the dynamic response of a structure to a specified loading that may vary with time.

Thiết kế bê tông cốt thép

Advance Design performs a global reinforced concrete design that computes theoretical and real reinforcement, crack design, interpolated cracked inertia, deflections checks, etc. All these results are available for all elements in detailed reports.

Embedding  Advance BIM Designers modules, it also provides detailed design intent and reinforcement drawings. BIM designers powers up Advance Design for the 3 elements: reinforced concrete beams, columns and footings,  allowing to go deep in the level of details such as openings, depressions, precasts, flanges. BIM designers integrated to Advance Design provides details drawings required for the construction site.

International-Codes

International Codes

Advance Design is a BIM FEA solution dedicated to structural analysis and design according to the latest versions of international standards such as Eurocodes (EC2) with their National Appendixes, American codes (ACI318-14) and Canadian codes (CAN/CSA A23.3-14)

Learn more

Design Templates

To better control all assumptions and avoid mistakes, design templates allow to group elements by design properties: concrete quality, cracking hypotheses, concrete cover, etc.

Required and Real Reinforcement Calculation

Advance Design computes the required reinforcement and propose the best possible reinforcement solution (bars, spacing, etc.) matching the constraints of the project.

Reinforced Concrete Slab Design

Reinforced Concrete Slab Design

The reinforcement of slabs can be entered by the user (fabrics or bars) or can be calculated precisely with the following checks : Cracked and non-cracked inertias, Cracking verification, Reinforced concrete deflection calculation, Punching verification.

Crack Width Analysis min

Crack Width Analysis

Advance Design performs a complete crack width check, which is mandatory in several codes, depending on the real reinforcement quantities on linear and planar elements

Detailed Punching Verification Under Slabs

Detailed Punching Verification Under Slabs

Complex design checks can be performed on slabs such as punching verification, for punctual supports and punctual loads

Detailed Design Reports

Detailed Design Reports

When linked to Advance BIM Designer, you get a detailed rebar report considering all detailed characteristic for beams, columns and footings (ex: beam openings, prefabricated parts  etc.).

Design Intent and Reinforcement Drawings

Design Intent and Reinforcement Drawings

When linked to Advance BIM Designer, you get an automatic design intent and reinforcement drawing for beams, columns and footings.

Thiết kế kết cấu thép và liên kết

Advance Design performs an advanced analysis and optimisation of steel elements and connections according to the selected standards. Design templates, shape and deflection optimisation through automated calculation cycles, a wizard for steel structures and a detailed global report including all design checks and graphical results makes Advance Design a high-end solution to design steel structures.

International-Codes

International Codes

Advance Design performs an advanced analysis and optimisation of steel elements and connections according to the selected standards. Design templates, shape and deflection optimisation through automated calculation cycles, a wizard for steel structures and a detailed global report including all design checks and graphical results makes Advance Design a high-end solution to design steel structures.

Learn More

Design Templates - steel member and connection design

Design Templates

To better control all assumptions and avoid mistakes, design templates allow users to group elements by their design properties:  buckling lengths, lateral-torsional buckling restraints, deflections, durability and fire resistance, etc.

Fire Verification

Fire Verification

Advance Design performs the fire verification of steel elements according to §4.2 (simplified method) of Eurocode 1993-1-2 as fire resistance (§4.2.3) and critical temperature (§4.2.4).

Steel Structure Designer

Steel Structure Designer

A valuable application that incorporates an extensive range of structure definitions and tools allowing users to model projects in minutes..

Connection Groups Management

Connection Groups Management

Streamline the design of connections with the connection group management of Advance Design.

Link with Advance Design Steel Connection

Link with Advance Design Steel Connection

Advance Design connects to Advance Design Steel Connection for designing any complex joint using a finite element method combined to Eurocode 3 and AISC..

* Advance Design Connection needs to be purchased separately.

Joints Design

Steel Structure Designer

Advance Design embeds* the steel connection module of Advance BIM Designers and allows users to quickly design beam-column, base plate, Apex, clip angles, gussets, splices connections according to Eurocode 3.

with Professional Steel and Premium Packages

Accurate Steel Verification

Accurate Steel Verification

Steel verifications including automatic buckling and lateral-torsional buckling length computation, classification of cross sections, deflections, cross section resistance, stability of members and the optimisation of steel shapes.

Shape Optimisation

Shape Optimisation

The shape optimisation calculation for steel elements can be performed considering the condition of maximum deflection.

 
 
 
More features
  • Design all cross sections even outside the scope of the EC3. Warping Torsion Second-Order Analysis with 7th degree of Freedom.

Thiết kế kết cấu gỗ

Timber is getting more and more traction in the construction space and timber design has become more complex with the application of the Eurocode 5.

Advance Design performs a complete analysis and optimisation of timber elements. The verification - a complex, but fast process, even if the structure has a high degree of complexity - offers a competent diagnosis of your model.

European Codes - Timber Design

European Codes

Advance Design is a BIM FEA solution dedicated to structural analysis and design according to the latest versions of international standards such as Eurocodes (EC5) with their national appendixes.

Learn more

Design Templates - Timber Design

Design Templates - Timber Design

To better control all assumptions and avoid mistakes, you can define design templates that can be applied on a selection of elements. Design templates can be saved and used in different projects.

Design Templates - Timber Design

Fire Verification

Advance Design also performs the fire verification of timber elements. You can easily define the fire exposure period and the faces exposed to fire.

Fire Verification - Timber Design

Accurate Timber Verification

Advance Design performs the timber verification and provides access to results for safety coefficients, deflections, buckling, cross section strength and element stability.

Cross Sections optimisation

Cross Sections optimisation

The optimisation process offers solutions to find the best section for elements of the structure according to the loads.

Detailed Shape Sheets

Detailed Shape Sheets

The shape sheets command allows users to view at one glance all the available results for a timber element: cross section properties, deflections, strength, stability and fire resistance, in one dialog box.

Detailed Design Reports

A customisable report manager allows users to create and save detailed design reports that can be reused for any project.

Tiêu chuẩn thiết kế

Item Standard
Materials  Steel: AISC ASTM; CAN/CSA CISC G40; EN 10025-2-6; EN 10210-1; EN 10219-1; AISC ASTM; CAN/CSA G40; BS EN 1993-1-1 (UK); NF EN 10025-2-6 (for buildings); NF EN 10025-2-6 (for other structures) - France
 Concrete: ACI 318 & 318M; CAN/CSA CAC A23; EN206; NFB18-406; STAS 10107/0-90; ACI318M-08*; CSA A23
 Timber: EN 14081-1 (Softwoods; Hardwoods; Glued woods); EN 14374/14279 (Veneer plywood); NP005
Cross-sections  AISC
 CISC
 European profiles
 OTUA Profiles
 Advance Steel Database Profiles
 North American Profiles
Seismic Analysis  IBC 2012 - USA.
 CNB 2010 - Canada
 CNB 2015 - Canada
 PS92 / PS92-2010 - France
 P100/2006, P100-1/2013 - Romania
 RPS2011 - Morocco
 EC8 - With national Appendix for France, Romania, Slovakia and Czech Republic
 RPA99 - 2003 (Algeria)
 NTC2008 - Italy
Climatic Actions (Wind and Snow)  CNB 2010 - Canada
 CNB 2015 - Canada
 ASCE 7-10 - USA
 NV65-84/2009 - France
 CR1-1-3/CR1-1-4 (2012) - Romania
 EC1 - With national Appendix for France, Great Britain, Romania, Germany, Poland, Slovakia and Czech Republic
 NTC2008 - Italy
Load Combinations  ASCE 7 2010 - USA
 CNB 2010 - Canada
 CNB 2015 - Canada
 BAEL 91 - French regulations for load combinations (concrete structures)
 CM66 - French regulations for load combinations (steel structures)
 CR0-2012 - Romanian regulations for load combinations
 EC0 - European regulations for load combinations with national Appendix for France, Great Britain, Romania, Germany and Czech Republic
 NTC2008
Concrete Design  ACI318-14
 CAN/CSA A23.3-14
 BAEL91 - France
 10107/0-90 - Romania
 EC2 - With national Appendix for France, Great Britain, Romania, Germany, Poland, Slovakia and Czech Republic.
 NTC2008 - Italy
Steel Design  ANSI/AISC 360-10 (ASD & LRFD)
 CAN/CSA S16-09 & CAN/CSA S16-14
 CM66 France
 EC3 - With national Appendix for France, Great Britain, Romania, Germany, Poland, Slovakia and Czech Republic.
 NTC2008 - Italy
Timber Design  EC5 With national Appendix for France, Great Britain, Romania, Germany, Poland, Slovakia and Czech Republic.
 NTC2008 - Italy

 

Video

Cấu hình

Dùng thử

Vui lòng điền thông tin dưới đây để nhận bản dùng thử của chúng tôi
Họ tên
Công ty
Email
Địa chỉ
Điện thoại
Phần mềm

Báo giá

Họ tên
Công ty
Email
Địa chỉ
Điện thoại
Phần mềm
Lời nhắn