Tổng quan

Gói phần mềm Adapt Builder 

Trước đây ADAPT chi được biết đến với khả năng phân tích và thiết kế sàn bê tông dự ứng lực. Nhưng đến nay phần mềm Adapt Builder đã cung cấp đẩy đủ công cụ tđể tính toán tổng thể một tòa nhà hoàn thiện. Để làm được điều đó, Adapt Builder cung cấp công cụ mô hình 3D tích hợp đầy đủ các thành phần kết cấu của tòa nhà, với giao diện dễ dàng sử dụng, ứng dụng cho tất cả các dạng công trình bê tông cốt thép, như dầm, sàn, cột, vách, sàn móng, sàn trên nền đàn hồi, ram dốc...

(mô hình tổng thể tòa nhà trong Adapt Builder)

Với Adapt Builder, người dùng có thể tùy chọn thiết kế từng thành phần sàn riêng biệt hay thiết kế tổng thể cả công trình để tối ưu hóa kết cấu & vật liệu. Module Floor Pro, MAT, SOG & EDGE được tích hợp hoàn toàn trong gói Adapt Builder giúp người dùng linh hoạt hơn cho cách lựa chọn phương án thiết kế kết cấu.

(mô hình sàn gồm các lỗ mở thang máy trong Adapt Builder với module Floor Pro)


Structural Modeling

  • Generates a true 3D solid physical model of an entire floor system or complete concrete building

    • No simplification of geometry or manual creation of analytic model required

    • Uses smart components to assemble an entire floor system: slab regions, walls, beams, columns, drop caps, drop panels, rebar, tendons and openings

    • Models steps above and below the slab as well as any type of slab depression

    • Define standard concrete sections or generic steel members

  • Streamline modeling process by importing DWG/DXF files and intelligently converting to structural components

  • One-click switches between single- and multi-level modeling modes

  • Define multiple stiffness profiles for your model, e.g., uncracked for gravity and cracked for global lateral analysis

  • Coordinated multi-level modeling saves time and reduces errors

  • All slab models for a project can be in one model file

  • Flexible definition of component releases and boundary conditions

  • Handles complex models with ease and accuracy

  • Models can be supported on columns, walls, point supports, line supports, or any configuration of springs (point, line or area representing soil)

  • View and examine 3D rendered solid model to verify the accuracy of the structure's representation


  • Apply loads of any configuration, anywhere on the slab

  • Supports live load patterning and automatically reduced live loads, where applicable

  • Define gradient or uniform temperature loading

  • Subject model to shrinkage strain

  • Can model internal lateral load reactions imported from ETABS

  • When used with Edge, analyzes structure for any applied building lateral loads including wind and seismic forces

Tributary-Area Based Load Takedown

  • Patented algorithm automatically breaks down any concrete floor system into tributary regions (US Patent No.: 9,471,720)

  • Automatically detects discontinuities in columns and walls and transfers loads down to foundation

  • Calculated tributary-area based load takedown

  • Use tributary loads to design columns, transfer slabs or beams

  • Graphically compare tributary loads against FEM results - excellent method to check your models

Post-Tensioning and Prestressing

  • Uses integrated tendon modeling as opposed to "balanced loading". This overcomes many of the approximations and shortcomings inherent in the conventional modeling of post-tensioning. Ask ADAPT to email you a technical note on its modeling approach [Aalami, Bijan, O "Structural Modeling of Post-Tensioned Members." American Society of Civil Engineers, Structural Journal, February 2000, pp. 157-162]

  • Model bonded or unbonded tendons

  • Layout tendons using straight or spline span segments

  • Swerve tendons around openings while maintaining vertical curvature

  • Design using effective force or specify stressing ends and friction loss parameters

  • Calculates prestressing force in members as well as secondary restraining effects (hyperstatic moments) due to prestressing

  • Tendon generation wizards for banded and distributed tendons

  • Automatically or manually model and dynamically edit tendons in plan or elevation 

  • Tendon curvature check against a minimum horizontal and vertical radius of curvature

  • Automated tendon clash detection

  • Program calculates and graphically shows force along tendon

Analysis Capabilities

  • Industry leading automated 3D finite element meshing algorithm

  • Performs a detailed finite element analysis of the entire floor systems and its supporting structure using shell and frame elements

  • Unlike other slab programs in the market that are dressed up 2D plate software, ADAPT-Floor Pro is based on a true 3D finite element model

  • Smart components automatically establish required FEM connectivity, eliminating need for manual fine-tuning of analysis model

  • Calculates cracked section deflections

  • Carries out integrated modal vibration analysis on complete model or any user-defined sub-region

  • Considers cracking when calculating frequencies

  • When used with Edge, multi-story building models generated in Floor Pro can be analyzed for gravity and lateral loads

Design and Automatic Code Checks

  • Easily define support lines - even for complex geometries

  • Support line wizard

  • Automatically generates all critical design sections

  • Column strip / middle strip option

  • Performs code check and reports the location and amount of reinforcement needed for entire floor system

  • Define arbitrary manual design sections - software calculates actions, required rebar and moment capacity

  • Provides instant graphical design feedback in model by displaying:

  • Stresses - top and bottom against code allowable values

  • Design actions along support lines

  • Average precompression

  • Percent dead load balance

  • Deflection along support line showing L/Def values per span

  • Member forces - columns, beams and walls

  • Allows user to design for specified crack width

  • Shows calculated drack width contours on slab

  • Wood-Armer design option

  • Calculates punching shear stresses, performs checks, and specifies stirrup or stud rail reinforcement needed

  • Designs and specifies one-way shear reinforcement for beams

  • Reinforcement display per load combination, either along support lines or with user-defined orientation

  • Edit graphical rebar layout report to optimize rebar layout

  • When used with Edge, automatically combines gravity analysis results carried out at slab level with lateral load solution obtained at building level

Output and Reports

  • Detailed quantity takeoff report

  • Generates both professional and ready-to-submit graphical and tabular reports

  • Exports all geometry, reinforcement and tendon information to DWG or DXF format

  • Export rebar design as 3D model objects into Revit Structure

  • Create column loading and design tables in XLS format

Dynamic Rebar Design and Detailing (DRD)

  • Model typical reinforcement as base reinforcement using either mesh rebar, single bars or distributed rebar

  • Edit calculated reinforcement graphically using rebar libraries to optimize rebar layout

  • Freeze your final rebar layout by converting it to base rebar

  • Carry out strength investigations and generate demand/capacity curves for critical sections

  • Each base reinforcement can have unique cover and material properties

PT Shop Drawing Module

  • Perform friction and elongation calculation
  • Manage and display tendon chair heights

  • Calculate tendon quantities and generate tendon specific reports


The program supports the following design codes:

  • ACI-318 (1999, 2005, 2008, 2011 and 2014)

  • IBC [International Building Code] (2006, 2009, 2012 and 2015)

  • British-BS8110 (1997)

  • Canadian-A23.3 (1994)

  • Canadian-A23.3 (2004)

  • Canadian-A23.3 (2014)

  • Australian-AS3600 (2009)

  • Brazilian-NBR6118 (2014)

  • Indian IS456 (2005 reprint)

  • European EC2 (2004)

  • Hong Kong-CoP (2013)

  • Chinese-GB50010 (2002)

  • Singapore SS EN 1992-1-1/NA:2008-06 Annex to EC2


The program integrates with the following third party programs and file formats:

  • Autodesk® REVIT® Structure 2015 - 2019: 1:1 bi-directional integration with physical model including loads, reinforcement can be imported back into REVIT®  

  • ETABS: import geometry lateral and gravity loads including load cases 

  • Import and export of DWG/DXF files


The program supports the following units:

  • SI

  • MKS

  • American Customary

Mat (Raft) Foundation Design

  • To model and design soil or pile supported foundation mat (raft) foundation systems, use ADAPT-MAT. All the modeling and intelligent features availabe in Floor Pro are also available in MAT.

Design of Ground Supported Slabs (SOG) on Expansive Soil

  • To model and design post-tensioned slab-on-grade projects on expansive soils, use ADAPT-SOG. It offers a 3D finite element modeling approach for slabs supported by soil and subject to applied ym displacements.

Link with ADAPT-PT and ADAPT-RC

  • The structural model generated can be used with no modification to run either on ADAPT-PT, or ADAPT-RC, both of which are based on Equivalent Frame Method. Conversely, the User can first design the floor system using ADAPT-PT, determine the optimum force, profile and location of the post-tensioning. and then within the same model run the ADAPT-Builder-Floor Finite Element Analysis. The procedure is detailed in a PTI publication [Aalami, Kelly, "Design of Concrete Floors with Particular Reference to Post-Tensioning, PTI, Technical Note 11, issue 2001, pp.16].


Cấu hình

Cấu hình máy tính yêu cầu

  • 64 bit PC running windows 7, 8 or 10

  • Minimum of 4 GB RAM

  • Available hard drive space of 1 GB

Dùng thử

Vui lòng điền thông tin dưới đây để nhận bản dùng thử của chúng tôi
Họ tên
Công ty
Địa chỉ
Điện thoại
Phần mềm

Báo giá

Họ tên
Công ty
Địa chỉ
Điện thoại
Phần mềm
Lời nhắn